PRO7000FX

Features a frequency counter that can display the frequency of a detected signal (0-2560 MHz) to quickly and reliably establish what kind of signal is present whilst performing a counter-measures sweep.

Once a signal is located it is then processed by the intelligent software algorithms of the PRO7000FX to determine whether a signal is Analogue or Digital. These features allow fast elimination of innocent signals from a sweep. All this information is displayed on the customised back-lit LCD display which can be clearly viewed in all lighting conditions.

The ‘Burst Detect’ feature helps to locate the latest digital devices that only transmit momentarily and can therefore be easily missed using conventional bug detectors. Such devices include GPS Trackers and GSM (Mobile phone) based devices where a 'Burst' signal or SMS (Text Messages) are sent momentarily. The PRO7000FX will alert you if a device has transmitted within the vicinity even for just a fraction of a second.

The PRO7000FX has an internal Lithium-Ion battery pack and uses an intelligent charger system to ensure the battery remains in top condition for the most demanding situations. The whole unit is contained within a machined aircraft-grade aluminium enclosure for ultimate performance and durability and supplied in a portable carry case for further protection and portability.

· Detects both Digital & Analogue Signals
· Ultra Wide Frequency response 7200MHz (7.2GHz)
· Built in Frequency Counter (0 to 2560 MHz)
· Intelligent ?Digital ? or ?Analogue? Indicator to determine signal +type
· Digital ?Burst? Signal Detect for Burst/GSM/3G/GPS Devices
· 10 Segment Signal Strength Meter
· Ultra High Sensitivity to locate even the weakest signals
· Backlit LCD Display for use in all conditions
· Audio Demodulation
· Silent Vibrate & Beep Modes for Signal Strength
· Internal Li-Ion Battery Pack and Mains Charger
· Machined Aluminium enclosure for ultimate durability



Supplied Accessories

Semi-Rigid Wideband Whip Antenna
Flexible Wideband Whip Antenna
Earphones
9V DC Charger - 110V to 240V AC input (Auto Switching) with International Adaptors
Protective Carry Case
 

Technical Specification 

ANTENNA INPUT 

Connector MCX Socket - 50 Ohm 

Input Frequency Range 1MHz – 7200MHz (7.2GHz) 

Sensitivity 100MHz -47dBm 

200MHz -47dBm 

500MHz -46dBm 

1GHz -41dBm 

2GHz -29dBm 

5GHz -8dBm 

7.2GHz -3dBm 

Demodulation Sensitivity for 50mW Audio -30dBm (measured at 500MHz 50% AM 1kHz) 

Frequency Response 400Hz – 5kHz +/-2dB 

INSTRUMENT DISPLAY 

Type LCD STN Backlit 

RF Signal Strength 10 element bargraph 

RF Carrier Frequency 2560.0MHz (2.56GHz) maximum

INTERNAL AUDIO AMPLIFIER 

Output Power 0.25W 

Frequency Response 300Hz – 15kHz +/-1dB 

Headphone Connector 3.5mm Jack

MISCELLANEOUS 

Internal Battery 7.2V 650 mAH Li-Ion rechargeable 

Operating Duration 8 hours 

Charge Time – using supplied charger 3 hours maximum 

Operating Temperature Range -10 – +50 degrees C 

Relative Humidity  < 90% 

Dimensions 114mm x 69mm x 25mm

Weight 245 g 

Signal Processing and Control RISC Based Microcontroller

£1999 inc vat